EL flashing is ideal for a fit of a window with slated roofs coverings up to 10mm (2 x 5mm) thickness. It is applied as standard to individual windows in the slope of the roof. A series of window units may also be combined:

This flashing is available in two different types allowing windows to be installed at two different depths in the roof construction V (0) and J (-3cm). The standard installation of windows with the application of flashing EL is V– version ELV.

Can be used in roofs with pitches:

from 15° to 90° for depths N and V,

from 20° to 90° for depth J.


Constituents of the Flashing:

This flashing is made up of lower, upper and side elements, the dimensions of which are dependent on the window height. The side elements of the flashing are laid alternately with the roof covering. The lower element has a plastic mat glued to the underside thus allowing the flashing to adhere to the roof covering for a neat fit. A gutter installed above the window allows condensation to drain away.